Power Supply Jumping Guide

Now find 2 yellow wires and 2 black wires, and get your LED’s.  Now we can give it more light to shine up your PSU more.  Now take 4 LED’s and solder them in series.  This is done by connecting + to - the + is the longer wire on the LED.  Now solder the yellow wire from the PSU to the + on your series of LED’s, and the black to the – end of your LED’s.  Do this again with the other set of LED’s.

             Now find your PSU cover, and decide where you want your windows.  You can have a top, and side windows.  But if you want side windows make sure you have clearance.  Now cut your window in whatever shape or design you want.  I choose a regular rectangle window.  Now cut the clear material you chose to size.  You can either tape it in, bolt it or rivet it.  Drill holes into PSU cover and clear material so they correspond each other.  And bolt/rivet your window in.  I chose a top window and to rivet it.

Now find a place to mount your LED’s, I chose the side of the PSU cover.  Now tape them in place, put a layer of tape so the bare parts from the LED’s don’t hit the cover. 

Now screw the cover into place and you should have a fully functional test PSU.  This is the finished product of mine.

Here you can see the LED’s