NavigationAdSense |
Evercool SHDC-B Hard Drive Cooler
Introduction To be quite frank, case designs today just aren’t sufficient enough to cool off our hard disks. Sure, back in the time where 5400 RPM hard disks were mostly stocking our computers, hard disk cooling wasn’t a note worthy factor in after market cooling, but with 7200 RPM + drives a standard or when one possess multiple hard disks, hard drive cooling becomes a grabbing issue. By hardwaremods at 2006-05-08 14:51 | read more
Nemesis Elite Case
Nemesis Elite Case Riding on the success of the largely popular Guardian line of cases. NZXT has just released the Nemesis Elite Case. The Nemesis Elite Case features a unique exterior look. NZXT used a combination of Die-Cast technology along with brushed aluminum to make Nemesis Elite Case look like it was make from a knight's plate armor. The most obvious feature of the Nemesis Elite Case is the LCD Fan Controller installed on top of the case. The included fan controller is an awesome feature to have to quiet down the included three blue 120mm fans. It also saves you the hassle of trying to find fan controllers that match the look of the case, because the fan controller is blended perfectly with the case. The front "eye" LED can also change to seven different colors. By hardwaremods at 2006-05-08 14:24 | read more
Thermaltake CoolPad Thermaltake CoolPad Thermaltake has already established themselves as one of the leaders in the computer cooling industry, and they prove that status once more with their newest notebook cooler, the Thermaltake CoolPad. The Thermaltake CoolPad is extendable notebook cooler designed to fit all 8" - 15" notebooks. The outside casing of the Thermaltake CoolPad is made of aluminum, which is a great conductor of heat. This helps dissipate the heat generated by your notebook and extremely improves the performance of the Thermaltake CoolPad. The Thermaltake CoolPad also features dual 60mm fans. Another convenient feature of the Thermaltake CoolPad is the 4 port USB hub located on the side of the cooler. By hardwaremods at 2006-05-08 14:20 | read more
Thermaltake Shark Case Thermaltake Shark Case Thermaltake has made yet another addition to its case lineup with the brand new Thermaltake Shark Case. The Thermaltake Shark Case's design hints to shark fins and gills with the unique styling of its side panel. Instead of having the standard case window, there are two "fin shaped" areas of see threw mesh which really complement the whole theme of the Thermaltake Shark Case. Another feature of the Thermaltake Shark Case is the large 120mm blue LED fan that is included with the case which will draw all of the hot air away from your processor, along with a front 120mm intake fan. The Thermaltake Shark Case is also loaded with many other features that you would expect to find in a case manufactured by Thermaltake. The motherboard tray in the Thermaltake Shark Case is removable, which makes for a very easy installation. As expected with any high quality case, the Thermaltake Shark Case features front dual USB 2.0 ports, a firewire port, and audio ports. The front bezel can be locked shut to make sure that no one is fooling around with your system, and the see through side panel containes an EMI Shield. By hardwaremods at 2006-05-08 14:06 | read more
Func F-Series Mouse Pad Review
Func F-Series Mouse Pad Preview Func F-Series Competition Mousing sUrfaces are single-sided, large format mouse pads constructed of high quality polycarbonate with exceptional and consistent tracking qualities. The Func F-Series mousing surface incorporates a specially selected, low profile, textured synthetic rubber that exhibits exceptional traction characteristics on a desktop. F-Series Competition Mousing sUrfaces are available in either of the two surface textures that were popularized by the award-winning, double-sided sUrface1030. These two textures are the 10.S (commonly referred to as smooth) and the 30.R (commonly referred to as rough). The F10.S mouse pad features the surface texture 10 (smooth): a fine textured surface geometry based on a specially selected low Ra parameter and is popular with those who prefer the feel of mousing on a smooth surface. The F30.R mouse pad features the surface texture 30 (rough): a medium textured surface geometry based on a specially selected moderate Ra parameter and is popular with those who prefer the feel of mousing on a textured surface. By hardwaremods at 2006-05-06 19:55 | read more
Aspire X-Qpack Review
Aspire X-Qpack Description"The X-QPACK Portable Case from Aspire allows you to pack the guns of a big baller case in a compact, lightweight, portable package. Fully aluminum chassis construction provides strength and stability while helping dissipate heat and reducing weight. A stylish and functional front bezel houses many convenient features such as a temperature monitor, high speed I/O ports, and even a handle for easy transportation. The top and sides of this case boast clear acrylic windows allowing bystanders a peak inside your machine." - Xoxide.com By hardwaremods at 2006-05-06 19:53 | read more
Zalman CNPS 9500 Preview Zalman CNPS 9500 PreviewAuthor: Bob Hunt Zalman has announced the release of the Zalman CNPS 9500 LED CPU Cooler. Zalman claims that the CNPS 9500 will outperform all other air-cooled CPU coolers as well as water-cooling systems while operating almost silently at the same time! The primary design feature of the Zalman CNPS 9500 is the patented "figure 8" shape of the heatpipes. The figure 8 shape produces the effect of up to 6 normal heatpipes with only 3! The ultra slim heatsink fans, that are located inside the ring of fins, are aerodynamically designed and are placed to optimize performance. Both of these factores produce the effect of minizing airflow resistance and reducing the weight of the CNPS 9500 while maximizing cooling efficiency and performance. Zalman plans to design and introduce a variety of Zalman CNPS 9500 coolers each with unique designs, specifications, and performance. Zalman CNPS 9500 Features
By hardwaremods at 2006-05-06 17:09 | read more
Nikao DragonFire Case Review
Let me start off this review by saying that I am not a big fan of the new fad/style of ‘pre-modded’ cases. Most of them are either to glitzy, to cheap looking, or just plain look like garbage. I received an email from Bruce Young of Nikao Canada, mid afternoon on a Thursday, asking for my shipping address and telling me he would ship me out a case… I was a little shocked and pleasantly surprised when I heard a knock at the door the next morning at 9:00 am – there was a Purolator truck in my driveway and the delivery guy standing at my door with a case in his arms – now THAT is fast shipping! By hardwaremods at 2006-05-02 16:00 | read more
|
